Hammered Copper Range Hood with Darkened Copper Straps

Product Description

This hammered copper range hood with darkened copper straps combines a bell-shaped lower canopy, tapered front, substantial crown molding, and structured strap detailing in an all-copper design. Two darkened copper straps with exposed rivets divide the front into three balanced fields, while the canopy widens toward a deep straight apron. Handcrafted from 16-gauge copper in Santa Clara del Cobre, Mexico, the hood is available in widths from 28 to 78 inches and heights from 24 to 72 inches. It can be configured for wall-mount or kitchen-island installation and prepared for compatible ventilation equipment. Four copper patinas are available: Natural Fired, Dark Coffee, Antique, and Honey. The main product image shows the Natural Fired patina. Learn more about the hammered copper surface, darkened strap detailing, and customization in our hammered copper range hood darkened straps guide. Customize this handcrafted copper range hood for your kitchen project.

Product Summary

• Bell-shaped lower canopy
• Tapered front profile
• Two darkened copper straps
• Three balanced front fields
• Exposed round copper rivets
• Deep projecting crown molding
• Straight molded copper apron
• Handcrafted 16-gauge copper
• Four copper patina options
• Widths from 28 to 78 inches
• Heights from 24 to 72 inches
• Wall or kitchen-island mounting

Custom Sizing

This copper hood is handcrafted to order in multiple dimensions rather than being limited to one standard size. Available widths range from 28 to 78 inches, while heights range from 24 to 72 inches. Standard depth is 24 inches. These options allow homeowners, designers, and builders to coordinate the hood with different cooking surfaces, cabinet layouts, ceiling heights, and architectural conditions while preserving the defining bell profile, tapered front, darkened straps, crown, and apron.

Measurements Needed

Before ordering, confirm the cooking-surface width, desired hood width and height, ceiling height, mounting clearance, backsplash dimensions, adjacent cabinetry, and available depth. Island projects also require the cooking surface and hood to be centered accurately within the room. Crown projection, duct routing, electrical service, and ventilation access should be considered during the same planning stage. Review the copper range hood sizing guide when selecting dimensions for the project.

Ventilation

The enclosure can be prepared around several ventilation configurations. Rustica House offers an optional 200 CFM insert for compatible applications. Buyers may also provide specifications for an internal insert up to 1,260 CFM or an external blower system up to 1,500 CFM. Ducted or recirculating operation depends on the selected ventilation equipment. Insert dimensions, duct requirements, electrical connections, controls, lighting, filters, and service clearances should be established before fabrication. Review the range hood insert guide for additional planning information.

Drawing Approval

When using buyer-supplied ventilation equipment, provide the manufacturer, model, body dimensions, cutout requirements, duct diameter and location, controls, lighting, filters, electrical requirements, and service clearances. Production drawings allow the homeowner, designer, cabinetmaker, contractor, and ventilation professional to review hood dimensions, insert placement, duct position, crown clearance, mounting conditions, and the relationship between the enclosure and surrounding cabinetry before fabrication.

Bell and Tapered Architecture

The hood combines a structured tapered front with a more pronounced bell-shaped lower canopy. Beneath the crown, the body begins comparatively narrow and gradually expands as it approaches the cooking surface. Near the bottom, the sides develop a stronger outward sweep before meeting the apron. This combination creates a more sculptural profile than a simple pyramidal hood while retaining the organized architectural lines associated with a tapered copper range hood.

Tapered Front

The upper canopy follows controlled outward lines from the crown toward the wider lower section. This taper creates vertical emphasis and provides a clean architectural background for the two front straps. Because the hood can be ordered in different widths and heights, the final proportions are coordinated with the selected dimensions while retaining the characteristic transition from the narrower upper section into the broader lower canopy.

Lower Bell Flare

The lower sides curve outward more noticeably as they approach the apron, producing the bell-shaped character visible in the design. This flare broadens the visual base and creates a smooth transition between the tapered upper body and substantial lower molding. The combination of bell curvature and tapered geometry gives the hood a distinctive profile suitable for traditional, Mediterranean, Spanish Revival, and updated transitional kitchens.

Two Darkened Copper Straps

Two vertical copper straps divide the front canopy into three broad fields. The straps receive a darker finish than the surrounding copper, creating contrast while maintaining all-copper construction. Exposed round rivets are spaced along the bands and reinforce their vertical rhythm. Because the straps follow the expanding front profile, they visually connect the crown, central canopy, and lower apron without covering large areas of the hammered copper surface.

Deep Projecting Copper Crown

A substantial molded crown gives the upper canopy a strong architectural termination. The projecting top ledge extends beyond the narrower body, while layered copper transitions beneath it create depth and horizontal shadow lines. These profiles contrast with the vertical straps and taper below. The crown works particularly well with full-height cabinetry, substantial millwork, exposed architectural elements, and kitchens where the range hood is intended to function as a major visual focal point.

Deep Straight Apron

The lower canopy terminates in a deep straight apron framed by formed copper edges. Its strong horizontal geometry visually anchors the bell-shaped body and balances the vertical movement created by the two straps. The broad apron gives the lower section architectural weight while preserving a clear relationship between the canopy, molding, and cooking area. Its structured shape also allows the handcrafted copper surface to remain an important part of the overall composition.

Unique Design

This model is distinguished by the combination of a bell-shaped lower canopy, tapered front, two darkened copper straps, three front fields, exposed rivets, deep projecting crown, and substantial straight apron. Rather than relying on contrasting metals, the darker bands and rivets remain part of the all-copper construction. This gives the hood visual definition while preserving a unified material palette. Custom sizing and two mounting configurations allow the same architectural language to be adapted to different kitchen layouts.

Hammered Copper Texture

The hand-worked copper surface creates subtle variations in reflection, tone, and texture across the broad canopy. Hammer marks become particularly visible across the open fields between the straps, while formed edges, crown transitions, rivets, and apron molding introduce additional changes in depth. These variations distinguish handcrafted copper from mechanically uniform sheet-metal surfaces. Slight differences in hammering and patina are expected characteristics of individually fabricated artisan metalwork.

Four Copper Patinas

This hammered copper hood can be customized in Natural Fired, Dark Coffee, Antique, or Honey patina. The hood shown in the main product image was made in the Natural Fired patina, which highlights the hammered surface with warm copper tones and natural fire-developed variation. Dark Coffee creates a deeper brown appearance, Antique provides an aged character, and Honey introduces a warmer golden-copper tone. Patina selection can be coordinated with cabinetry, backsplash tile, countertops, flooring, and hardware. Compare available treatments in the copper patina finish guide.

Mounting Options

This design can be fabricated as either a wall-mount copper range hood or a kitchen-island copper range hood. Wall-mounted versions integrate with a backsplash, surrounding cabinetry, and wall-based duct routing. Island versions are finished for visibility from multiple directions and require appropriate ceiling support, centered placement above the cooking surface, and coordinated overhead ventilation. The mounting configuration should be selected before production so the enclosure and installation requirements can be prepared correctly.

Wall-Mount Installation

For wall installations, confirm framing, mounting height, backsplash dimensions, adjacent cabinetry, electrical access, and the planned duct route. The projecting crown requires adequate clearance from surrounding cabinets and decorative molding. The selected width and height should also be coordinated with the cooking surface and available wall space before production.

Kitchen-Island Installation

Island installations require structural ceiling support and accurate alignment between the hood and cooking surface. Ductwork and electrical service generally approach from above, making early coordination with the contractor and ventilation professional especially important. Because the hood is visible from multiple directions over an island, the installation configuration should be specified when ordering.

Buyer Planning

Begin by selecting the width, height, mounting configuration, copper patina, and ventilation equipment. Then confirm the cooking-surface dimensions, ceiling height, cabinet clearances, crown projection, duct route, electrical requirements, and structural support. Providing these details before fabrication helps preserve the hood's intended bell-and-tapered architecture while adapting the enclosure to the specific kitchen project.

Copper Hood Specifications

• SKU: KF91U5T74
• Width: 28–78 inches
• Height: 24–72 inches
• Depth: 24 inches
• Shape: Bell with tapered front
• Mount: Wall or kitchen island
• Material: 16-gauge copper
• Texture: Hand-hammered copper
• Straps: Two darkened copper straps
• Front: Three copper fields
• Rivets: Exposed round copper
• Crown: Deep projecting molding
• Apron: Deep straight molded apron
• Patinas: Four copper options
• Shown: Natural Fired patina
• Ventilation: Ducted or recirculating
• Insert: Optional 200 CFM
• Buyer insert: Up to 1,260 CFM
• Blower: External up to 1,500 CFM
• Build: Handcrafted to order
• Origin: Santa Clara del Cobre

PDF and CAD Downloads

Download the technical drawings to review the bell-shaped profile, tapered front, darkened copper straps, projecting crown, straight apron, and overall proportions. The PDF supports project and installation planning, while the CAD file helps architects, interior designers, cabinetmakers, contractors, and ventilation professionals coordinate custom dimensions, cabinetry, ductwork, and the cooking area.

• Hammered copper hood drawing PDF
• Hammered copper hood CAD/DXF

Copper Craftsmanship

Each range hood is handcrafted in Santa Clara del Cobre, Mexico, where copperworking traditions continue through skilled artisan production. Fabrication involves forming the tapered canopy, developing the lower bell flare, constructing the crown and apron, hammering the copper surface, and fitting the darkened straps and rivets to the front. Because the enclosure is individually produced, subtle variations in hammering, formed details, and patina contribute to the character of the finished hood.

Coppersmith Testimony

The transition between the tapered upper body and wider lower bell section requires careful forming so both sides remain balanced at the selected dimensions. The two straps must also follow the expanding front while remaining aligned with the crown and apron. Learn more about the regional craft and the work of Juan Carlos Hernández copper artisan.

Best Interior Styles

The bell-shaped profile, tapered front, darkened copper straps, substantial crown, and handcrafted surface give this hood a strong architectural character. Its warm copper patinas work especially well with interiors combining natural stone, plaster, wood, artisan tile, masonry, and detailed cabinetry. See how hammered copper and contrasting darkened straps work with surrounding kitchen materials in our hammered copper range hood darkened straps kitchen images.

• Mediterranean Estate: Natural stone, warm plaster, dark wood cabinetry, and artisan tile complement the hammered copper surface and substantial crown molding.
• Spanish Revival: Exposed beams, arched openings, handmade tile, and dark wood coordinate with the riveted straps, bell profile, and aged copper character.
• Mexican Hacienda: Rustic beams, textured plaster, colorful tile, and masonry reinforce the handcrafted character of traditional copper metalwork.
• New Traditional: Inset cabinetry, stone countertops, detailed millwork, and symmetrical layouts complement the projecting crown and structured front composition.
• Transitional: Warm-white cabinetry, natural oak, quartzite, and restrained hardware balance the handcrafted copper with the organized three-field front.

Other Interior Styles

• Tuscan Villa
• Rustic Farmhouse
• Southwestern

FAQ – Hammered Copper Range Hood

Customize Your Copper Hood

Configure this handcrafted copper range hood around the proportions and installation requirements of your kitchen. Select a width from 28 to 78 inches, a height from 24 to 72 inches, wall-mount or kitchen-island construction, and Natural Fired, Dark Coffee, Antique, or Honey patina. Ventilation preparation can also be coordinated around compatible equipment. The bell-shaped lower flare, tapered front, darkened copper straps, deep crown, and straight apron give the design a recognizable architectural identity across different project sizes. Customize this hammered copper range hood for your kitchen.

Related Resources

• Tuscan Copper Hood Designs
• Spanish Style Copper Hoods
• Copper Patina Finish Options
• Guide to Hammered Copper
• Copper Range Hood Sizes
• Copper Range Hood Buying Guide
• Wall and Island Hood Guide

Care & Maintenance

Clean the copper with mild soap, warm water, and a soft nonabrasive cloth, then dry the surface promptly. Avoid abrasive pads, steel wool, bleach, acids, and aggressive polishing products that may alter the selected patina. Copper naturally changes with age and environmental exposure. Review the copper range hood cleaning and care guide for detailed recommendations.

Installation

Installation planning should account for structural support, mounting height, duct routing, electrical access, ventilation equipment, crown clearance, and surrounding cabinetry. Island versions also require appropriate ceiling framing and accurate alignment above the cooking surface. Review the metal range hood installation guide with your contractor and ventilation professional.

Shipping & Returns

This handcrafted copper range hood is produced to order and securely crated for freight transportation. Review current production timelines, delivery procedures, inspection requirements, custom-order conditions, and applicable return terms on the Shipping & Returns page before ordering.

Warranty

The handcrafted copper enclosure is covered according to applicable Rustica House warranty terms. Buyer-supplied ventilation equipment remains subject to its manufacturer's warranty. Review current coverage, limitations, and exclusions on the Rustica House Warranty page.

Disclaimer: Handmade dimensions, formed curves, hammer marks, seams, strap alignment, rivet placement, crown and apron details, and copper patina tones may vary slightly due to artisan fabrication. These variations are expected characteristics of handcrafted copper and are not manufacturing defects. Copper patinas may continue to develop naturally with age and use. The main product image shows the Natural Fired patina. Lifestyle images may show appliances, cabinetry, decorative elements, or accessories not included with the product. All product images © Rustica House, unauthorized use is prohibited.