Old World Bell Copper Range Hood with Architectural Crown and Riveted Straps

Product Description

The Old World bell copper range hood with crown and riveted straps is a made-to-order architectural hood distinguished by its monumental flared canopy, narrow upper body, deep stepped apron, and softly hammered antique copper surface. Unlike a straight-sided tapered hood, the lower canopy expands through pronounced outward curves, creating greater depth and a more sculptural presence above the cooking area. A substantial projecting crown frames the chimney, while two vertical straps and exposed round rivets organize the broad front without relying on floral motifs, medallions, or elaborate relief work. Handcrafted from 16-gauge copper in Santa Clara del Cobre, Mexico, the hood is available from 28 to 78 inches wide, 24 to 72 inches high, and 24 inches deep as standard. Wall and kitchen island configurations are available with six copper finish options and preparation for compatible ventilation equipment. Compare handcrafted fabrication, architectural proportions, finish options, and custom sizing in our complete old world bell copper range hood architectural crown guide. Request a custom proposal for an architectural bell copper hood built around your kitchen.

Product Summary

• Monumental architectural bell profile
• Hand-hammered 16-gauge copper
• Projecting crown and stepped apron
• Vertical straps with exposed rivets
• Ventilation support to 1,500 CFM
• Custom widths from 28–78 inches
• Wall or kitchen island installation
• Six handcrafted copper finishes

Custom Sizing

Each hood is fabricated to order so its proportions can be coordinated with the range, cabinetry, backsplash, ceiling height, and surrounding architecture. Standard widths range from 28 to 78 inches, heights from 24 to 72 inches, and depth is normally 24 inches. The upper chimney width, three-dimensional bell flare, crown projection, apron depth, strap spacing, and overall dimensions can be adjusted while preserving the visual hierarchy of the original design. This flexibility is especially useful over oversized ranges, substantial cooking walls, and open kitchen islands where a smaller appliance-style hood could appear visually undersized.

Measurements Needed

Provide the cooking-surface width, desired hood width, available overall height, mounting height, backsplash thickness, adjacent cabinetry clearances, ceiling height, finished depth, and planned duct route. Island installations also require the cooktop centerline and structural-support locations. These measurements allow the canopy flare, crown, apron, insert opening, internal framing, and duct position to be coordinated before fabrication begins.

Insert Planning

The decorative copper shell and mechanical ventilation system are planned as separate components. Rustica House can supply the optional 200 CFM insert for compatible applications. The hood also supports buyer-supplied internal inserts up to 1,260 CFM and external blower systems up to 1,500 CFM. When using buyer-supplied equipment, provide the manufacturer, model, body dimensions, liner opening, duct diameter, discharge location, controls, lighting, filter access, electrical requirements, and mounting information before production. This allows the underside opening to be fabricated around the selected system instead of forcing the project around one proprietary insert.

Drawing Approval

Custom projects should confirm the front and side proportions before fabrication. Review the chimney width, bell flare, crown projection, apron depth, finished dimensions, insert opening, and duct centerline. This step is particularly important when the hood must align with tall cabinetry, stone surrounds, ceiling beams, decorative backsplash layouts, or an existing ventilation route. Approved proportions guide fabrication of both the visible copper exterior and its internal preparation.

Architectural Difference

This design is more architectural than a conventional bell or straight tapered copper hood. Its upper body remains relatively narrow before the lower sides transition into pronounced outward curves, producing a deeper three-dimensional flare. The oversized crown and stepped apron add visual mass at opposite ends of the canopy, making the hood resemble built-in architectural millwork translated into handcrafted metal. Compared with other bell-shaped copper range hoods, this model depends less on decorative appliqués and more on proportion, molding, surface texture, straps, and exposed construction details.

Bell Architecture

The canopy expands gradually through the upper section before curving more decisively outward near the cooking surface. From the front, this produces a formal and nearly symmetrical bell profile. From an angle, the side panels reveal that the flare extends through the hood's depth rather than appearing only as a curved front treatment. The broad lower capture area gives the hood substantial visual presence while providing generous space for a compatible liner or insert.

Material & Finish

Premium 16-gauge copper provides the substantial surface required for the broad canopy, projecting crown, straps, and deep apron. Soft hand hammering introduces controlled surface movement rather than a heavily distressed texture. The shown antique brown patina combines deep brown areas with warmer bronze highlights along raised edges, helping the crown, straps, and rivets remain visible. Small differences in patina, hammer impressions, seams, edge folds, and tool marks are expected characteristics of handmade fabrication.

Crown & Apron

The projecting crown is the hood's strongest classical feature. Multiple levels create horizontal shadow lines inspired by traditional European cornices and substantial cabinetry molding. At the opposite end, the deep stepped apron gives the bell canopy a visually grounded base. Together, these elements frame the large copper field and make the hood feel integrated with the room's architecture rather than suspended as a lightweight appliance enclosure.

Straps & Rivets

Two narrow vertical straps divide the broad front surface and emphasize the hood's height. Exposed round rivets introduce a forged-metal character while remaining secondary to the overall silhouette. A horizontal riveted element across the lower section visually counterbalances the vertical straps and reinforces the apron. The absence of scrolls, medallions, floral motifs, or elaborate embossing keeps the construction-inspired decoration disciplined.

Finish Options

The hood can be ordered in natural, honey, antique, coffee, oxidized green, or hand-polished copper. Lighter finishes emphasize the hammered texture and projecting molding edges, while coffee and antique patinas give the monumental canopy greater depth. Oxidized green creates a weathered architectural effect, while hand polishing produces stronger reflections across the broad curved surfaces. Because each finish is developed manually, subtle variation in shading and color concentration is normal.

Buyer Planning

Dimensions, bell flare, crown projection, apron depth, strap placement, copper finish, mounting configuration, and ventilation equipment should be reviewed as one system before fabrication because changes to one element can affect visual proportion, insert clearance, duct alignment, or structural support.

Range Hood Specifications

• Type: Old World copper range hood
• Construction: fabricated copper panels
• Material: 16-gauge copper
• Shape: architectural bell canopy
• Texture: softly hand hammered
• Crown: projecting multi-level molding
• Apron: deep stepped construction
• Details: straps and exposed rivets
• Width: 28–78 inches
• Height: 24–72 inches
• Depth: 24 inches standard
• Mount: wall or island
• Insert: optional 200 CFM
• Buyer insert: up to 1,260 CFM
• External blower: up to 1,500 CFM
• Lead time: about 6 weeks
• Delivery: about 8 weeks total
• Shipping: free USA mainland
• Warranty: 12 months
• Origin: Santa Clara del Cobre, Mexico
• SKU: VT54G3R41

PDF and CAD Downloads

Use the proportional PDF and DXF CAD drawings for cabinetry coordination, ventilation planning, dimensional reference, and installation preparation.

• Open proportional range hood drawing (PDF)
• Download range hood CAD drawing (DXF)

Copper Craftsmanship

The broad canopy is formed from individual copper sections over a rigid internal structure rather than pressed as a lightweight single-piece cover. Artisans shape the front and side panels, fabricate the projecting crown and stepped apron, apply the straps and rivets, hammer the exposed surfaces, and develop the selected patina by hand. This construction method allows the width, height, depth, flare, and insert opening to be modified while retaining the original architectural composition.

Kitchen Styles

The combination of European chimney proportions, substantial molding, aged copper, and restrained forged detailing makes this hood especially effective in kitchens built around stone, plaster, timber, traditional cabinetry, and warm natural finishes. See how the substantial copper silhouette integrates with traditional interiors in our old world bell copper range hood architectural crown riveted straps lifestyle images.

Best Kitchen Styles

• Tuscan: Travertine, plaster, walnut cabinetry, wrought iron, and warm stone provide the visual weight needed to balance the monumental bell canopy and antique copper finish.
• Spanish Colonial: White plaster, dark timber, Saltillo flooring, Talavera accents, and forged lighting complement the riveted straps without competing with the restrained metalwork.
• Old World Mediterranean: Terracotta, aged wood, textured plaster, and natural stone reinforce the European chimney influence and softly hammered copper surface.
• Rustic European: Reclaimed timber, wide-plank floors, stone counters, and aged hardware support the handmade character while the architectural crown keeps the composition refined.

Other Kitchen Styles

• French Country
• Transitional Old World
• Rustic Farmhouse

Bell Hood FAQ

Customize This Hood

Coordinate the width, height, depth, bell flare, crown projection, stepped apron, straps, patina, mounting configuration, and ventilation equipment before production. Request a custom proposal for an Old World bell copper range hood crafted specifically for your kitchen.

Related Resources

• Range Hood Insert Guide
• Range Hood Size Guide
• Copper Patina Options
• Copper Hammering Techniques
• Copper Range Hood FAQ
• Tuscan Copper Range Hood Guide

Care and Maintenance

Clean the copper with mild soap, warm water, and a soft nonabrasive cloth, then dry it promptly. Avoid acids, ammonia, bleach, abrasive pads, aggressive degreasers, and metal polish that can alter the artisan patina. Review the copper range hood cleaning and care guide or watch the step-by-step copper cleaning video.

Installation Guide

Confirm structural framing, mounting height, duct routing, electrical requirements, insert access, and final hood dimensions before installation. Review the range hood installation guide for wall and island planning.

Shipping & Returns

Allow approximately six weeks for production and about eight weeks for total delivery. Each made-to-order hood is securely crated, with free shipping to the USA mainland. Review applicable conditions on the Shipping & Returns page.

Warranty

The handcrafted copper shell includes a 12-month warranty, while replacement components for a Rustica House-supplied insert are covered for 12 months. Buyer-supplied ventilation equipment remains subject to its manufacturer's warranty. Review complete terms on the Rustica House Warranty page.

Disclaimer: Handmade hammer impressions, patina tones, seams, straps, rivets, molding joints, dimensions, and tool marks may vary slightly. These characteristics are expected in handcrafted copper and are not manufacturing defects. Lifestyle images are inspirational and may show optional finishes, configurations, or decorative items not included with the hood. All product images © Rustica House, unauthorized use is prohibited.