US Dollar
Euro
Australian Dollar
Canadian Dollar
Polish Zloty
British Pound
Product Description
This 36-inch bell copper range hood with a tapered front was designed specifically at 36 inches wide by 42 inches high, giving it taller proportions than many standard-width kitchen hoods. Its narrow upper canopy expands through a structured taper before transitioning into a pronounced bell-shaped lower flare. Two riveted copper straps divide the front into three balanced fields, while a deep projecting crown and straight molded apron frame the composition with substantial architectural detail. The hood is hand-hammered from 16-gauge copper in Santa Clara del Cobre, Mexico, and fabricated exclusively as a wall-mount model. Four patinas are available: Natural Fired, Dark Coffee, Antique, and Honey. The main product image shows the Natural Fired patina. Ventilation can be configured around approved equipment while preserving the hood's fixed architectural proportions. Learn more about the copper construction, bell profile, tapered front, and customization in our 36-inch tapered-front copper range hood guide. Order this handcrafted 36"W × 42"H copper hood for your wall-mount kitchen installation.
Product Summary
- Size: 36"W × 42"H × 24"D
- Width: Fixed 36-inch design
- Height: Fixed 42-inch profile
- Shape: Bell with tapered front
- Straps: Two riveted copper bands
- Crown: Deep projecting molding
- Apron: Straight molded copper
- Material: 16-gauge hammered copper
- Patinas: Four finish options
- Mount: Wall-mount only
- Build: Handcrafted to order
- Origin: Santa Clara del Cobre
Fixed 36 × 42 Design
This model is not a standard copper hood design proportionally resized to 36 inches. Its tapered front, lower bell flare, two-strap layout, projecting crown, and deep apron were designed specifically for a 36-inch width and 42-inch height. Keeping those dimensions fixed preserves the tall vertical composition and the transition from the narrow upper canopy into the wider bell-shaped base. At 24 inches deep, the enclosure provides substantial projection over the cooking area while retaining its intended front proportions. Buyers searching for a 36-inch copper range hood with a 42-inch height can therefore evaluate a defined architectural design rather than a silhouette that changes according to selected dimensions.
Measurements Needed
Before ordering, verify the available 36-inch width, full 42-inch hood height, 24-inch depth, cooking-surface location, mounting clearance, ceiling height, and relationship to adjacent cabinetry. The projecting crown also requires sufficient space near cabinet molding or other architectural details. Because this model retains its original 36-by-42-inch proportions, the kitchen should be planned around the enclosure rather than resizing its width or height. Review the copper hood sizing guide when coordinating the installation area.
Ventilation Planning
The enclosure can be prepared around approved ventilation equipment without changing its defining exterior architecture. Rustica House can supply an optional 200 CFM insert for compatible applications. Buyers may instead provide specifications for an internal insert up to 1,260 CFM or an external blower system up to 1,500 CFM. Equipment specifications must be supplied before production so the insert opening, duct location, electrical requirements, and internal clearances can be coordinated correctly. Ducted or recirculating operation depends on the selected ventilation equipment. Additional planning information is available in the range hood insert guide.
Drawing Approval
When using buyer-supplied ventilation equipment, provide the manufacturer, model, overall dimensions, cutout requirements, duct diameter and position, controls, lighting, filters, electrical specifications, and service clearances before fabrication. Production drawings allow the homeowner, interior designer, cabinetmaker, contractor, and ventilation installer to confirm how the equipment fits within the fixed 36"W × 42"H enclosure. Crown clearance, duct centerline, wall attachment, backsplash relationship, and surrounding cabinetry should also be reviewed before final approval.
Bell and Tapered Architecture
The profile combines two forms that are often treated separately in metal range hood design. The upper front follows a controlled outward taper, while the lower section develops a stronger curved sweep before reaching the apron. This produces a bell copper hood with a tapered front rather than a purely pyramidal or continuously curved silhouette. The 42-inch height gives both transitions enough vertical space to remain visible, resulting in a tall architectural profile that becomes broader and more sculptural near the cooking surface.
Tapered Front
Beneath the crown, the upper canopy begins relatively narrow and gradually widens as it descends. The long front edges establish a structured taper that gives the hood vertical emphasis and prevents the upper section from appearing excessively heavy. This geometry is particularly noticeable in the fixed 36-by-42-inch format, where the additional height creates a longer transition between the crown and lower canopy. The tapered section also provides a clean background for the two vertical straps.
Lower Bell Flare
Closer to the cooking surface, the tapered sides transition into a more pronounced outward curve. This lower bell flare broadens the visual base and distinguishes the hood from a simple tapered copper enclosure. The curvature terminates at the substantial apron, creating a deliberate transition between the sculptural canopy and horizontal lower molding. For buyers comparing bell-shaped and tapered copper range hoods, this model combines characteristics of both while maintaining a clearly defined architectural composition.
Two Riveted Front Straps
Two vertical copper straps extend down the front and divide the canopy into three broad fields. Exposed round rivets create a measured sequence along each strap and reinforce the handcrafted metalwork without covering the large copper surfaces. The straps follow the widening front geometry toward the apron, visually connecting the narrow upper canopy with the broader lower section. Their darker appearance against the Natural Fired body shown in the main image provides additional definition to the front elevation.
Deep Projecting Copper Crown
A substantial projecting crown gives the narrow upper canopy a strong architectural termination. The broad top ledge extends beyond the body, while multiple formed transitions beneath it create depth and horizontal shadow lines. These layered profiles contrast with the long vertical straps and tapered front below. Rather than functioning as a simple cap, the crown has the visual character of traditional cabinet or furniture molding, making the hood particularly suitable for kitchens with substantial millwork, full-height cabinetry, or decorative crown details.
Deep Straight Apron
The lower canopy terminates in a broad straight apron framed by projecting molding along its upper and lower edges. Its central copper face remains relatively restrained, without scalloped edges, pierced ornament, or embossed botanical motifs. This allows the apron to provide architectural weight without competing with the straps, rivets, and bell-shaped canopy. The strong horizontal base also acts as a visual counterpoint to the hood's tall 42-inch profile and two vertical front bands.
Distinctive 36-Inch Design
What separates this hood from other 36-inch copper models is the complete architectural combination rather than any single decorative element. The fixed 36"W × 42"H proportions, tapered upper front, lower bell flare, two riveted straps, deep projecting crown, and straight molded apron were designed to work together. The result is particularly useful for a kitchen requiring a standard 36-inch hood width but a taller and more formal enclosure. Its ornament comes primarily from proportion, formed copper, straps, rivets, and molding rather than elaborate embossed decoration.
Handcrafted Copper Surface
The copper body displays subtle variations associated with individually formed and finished metalwork. Broad uninterrupted areas between the straps allow the surface character and patina to remain visible, while the formed crown, curved lower canopy, apron edges, and riveted bands introduce changes in reflection and depth. These characteristics help distinguish handcrafted copper from mechanically uniform sheet-metal finishes. Slight variations in surface character, forming, and patina are natural consequences of artisan production and make each finished enclosure subtly individual.
Four Copper Patinas
This wall-mount copper hood can be customized in Natural Fired, Dark Coffee, Antique, or Honey patina. The hood in the main product image was made in the Natural Fired patina, which develops warm copper tones and natural fire-created color variation across the handcrafted surface. Dark Coffee produces a deeper brown appearance, Antique offers a quieter aged character, and Honey provides a warmer and more uniform copper tone. The selected patina can be coordinated with cabinetry, backsplash materials, countertops, flooring, and hardware. Compare the four treatments in the copper patina finish guide.
Wall-Mount Installation
This design is available exclusively as a wall-mount copper range hood. The vertical rear elevation allows the enclosure to sit against the kitchen wall above the cooking surface, while the canopy projects forward to its standard 24-inch depth. Wall installation also allows the tall tapered profile and projecting crown to integrate with a backsplash, flanking cabinets, shelves, or full-height millwork. This model is not configured as an island hood, so the wall structure, duct route, cabinetry, and cooking centerline should be established before production.
Wall and Cabinet Planning
Confirm adequate structural support in the wall and coordinate the hood with studs, backsplash dimensions, adjacent cabinets, ceiling height, and decorative molding. The projecting crown is wider than the narrow upper canopy and should not conflict with surrounding cabinetry. Ventilation ducting and electrical service should also be positioned according to the approved insert specifications. These details are especially important with a 42-inch-tall wall hood because the available vertical space determines both installation height and crown clearance.
Buyer Planning
The defining dimensions of this model are fixed, so the primary planning question is whether its 36-inch width, 42-inch height, and 24-inch depth suit the intended wall installation. Buyers should also select the copper patina, identify the ventilation equipment, verify the duct route, and confirm surrounding cabinet clearances before production. Establishing these details early allows the handcrafted enclosure to retain its original bell-and-tapered architecture.
| Planning | Confirm | Buyer Decision |
|---|---|---|
| Dimensions | 36"W × 42"H | Verify wall space |
| Depth | 24 inches | Check projection |
| Patina | Four options | Select copper finish |
| Mounting | Wall-mount only | Verify wall support |
| Ventilation | Approved equipment | Submit specifications |
Copper Hood Specifications
- Width: 36 inches exclusively
- Height: 42 inches exclusively
- Depth: 24 inches standard
- Shape: Bell with tapered front
- Front: Two vertical copper straps
- Fields: Three front copper panels
- Rivets: Exposed round details
- Crown: Deep projecting molding
- Apron: Deep straight molded base
- Material: 16-gauge copper
- Texture: Hand-hammered copper
- Patinas: Four copper options
- Shown: Natural Fired patina
- Mount: Wall-mount only
- Insert: Optional 200 CFM
- Buyer insert: Up to 1,260 CFM
- External blower: Up to 1,500 CFM
- Build: Handcrafted to order
- Origin: Santa Clara del Cobre
- SKU: GH10J4K55
PDF and CAD Downloads
Technical drawings help homeowners, designers, interior architects, cabinetmakers, contractors, and installers review the fixed 36"W × 42"H proportions, 24-inch depth, tapered front, lower bell flare, crown projection, apron, and wall-mount configuration. The CAD file can also be used by the buyer or interior architect when designing cabinetry and the surrounding kitchen around this specific hood. Final insert openings, duct locations, electrical requirements, and installation details are confirmed separately during production approval.
Crafted in Santa Clara del Cobre
The hood is handcrafted in Santa Clara del Cobre, Mexico, a community recognized for its copper-working tradition. Fabrication involves forming the tall tapered upper canopy, developing the stronger lower bell curve, constructing the projecting crown and molded apron, and fitting the two riveted straps to the expanding front geometry. Producing these elements at the intended 36-by-42-inch proportions requires careful alignment so the front remains balanced and the transitions between taper, curve, molding, and straps remain visually consistent.
Coppersmith Testimony
The transition from the tapered upper canopy into the wider lower bell section requires careful forming because the two sides must remain balanced across the full 42-inch height. The vertical straps must likewise follow the expanding front while remaining visually aligned with the crown and apron. Learn more about this regional metalworking tradition in the Juan Carlos Hernández copper artisan guide.
Kitchen Styles
The combination of a bell-shaped base, structured taper, riveted copper straps, substantial molding, and four patina choices allows this hood to work in kitchens ranging from historically influenced interiors to updated American designs. Its fixed 36-inch width makes it suitable for layouts planned around a standard residential cooking area, while the taller 42-inch profile gives the wall above the range greater architectural emphasis. Compare how the bell proportions and tapered front interact with cabinetry and surrounding finishes in our 36-inch bell copper hood tapered front design images.
Best Kitchen Styles
- Spanish Colonial: Plaster, dark wood, handmade tile, stone, and iron hardware complement the riveted copper and pronounced architectural molding.
- Southwestern: Terracotta, natural wood, warm plaster, patterned tile, and earthy stone coordinate naturally with a fired copper patina.
- Transitional: Warm-white cabinetry, quartzite, natural oak, and restrained hardware balance the traditional metalwork with cleaner surrounding lines.
- New Traditional: Inset cabinetry, stone counters, symmetrical layouts, and substantial crown molding reinforce the hood's tall architectural proportions.
Other Kitchen Styles
- Spanish Revival
- Modern Farmhouse
- Rustic Contemporary
36-Inch Bell Copper Range Hood FAQ
A: Its architecture was developed specifically for a 36-inch width and 42-inch height. The design combines a tapered upper front, pronounced lower bell flare, two riveted straps, deep projecting crown, and straight molded apron.
A: It combines both forms. The upper canopy widens through a structured taper, while the lower sides develop a stronger outward curve that creates the bell-shaped base.
A: No. This particular design is produced at 36 inches wide by 42 inches high so the original relationship between the tapered front, bell flare, straps, crown, and apron is preserved.
A: No. This model is available as a wall-mount version. The wall, cabinetry, duct route, and ventilation equipment should be coordinated around its fixed 36"W × 42"H dimensions.
A: The hood can be ordered in Natural Fired, Dark Coffee, Antique, or Honey patina. The main product image shows this exact 36-by-42-inch design in the Natural Fired patina.
A: Yes. Buyer-supplied internal inserts up to 1,260 CFM and external blower systems up to 1,500 CFM can be accommodated when complete equipment specifications are provided and approved before fabrication.
Order 36-Inch Hood
This fixed-size model is designed for buyers who need a 36-inch wall-mount copper range hood with a 42-inch height and want a more architectural silhouette than a conventional tapered enclosure. Its narrow upper canopy, lower bell flare, two riveted straps, deep projecting crown, and straight apron establish a distinctive identity while leaving broad areas of handcrafted copper visible. Choose Natural Fired, Dark Coffee, Antique, or Honey patina and confirm approved ventilation equipment before production. Request a proposal for this hand-hammered 36"W × 42"H bell copper range hood.
Related Resources
- Custom Copper Range Hoods
- Choosing the Right Hood
- Copper Hood Sizing Guide
- Copper Patina Finish Options
- Range Hood Insert Guide
Care & Maintenance
Clean the copper with warm water, mild soap, and a soft nonabrasive cloth, then dry the surface promptly. Avoid acids, bleach, steel wool, abrasive pads, and aggressive polishing compounds that may alter the selected patina. Take additional care around the straps, rivets, crown transitions, and molded apron. Review the copper range hood care guide for detailed maintenance recommendations.
Installation
This hood requires wall mounting with suitable structural support. Confirm mounting height, wall framing, electrical service, duct routing, insert access, backsplash dimensions, and adjacent cabinet clearances before production. The projecting crown and fixed 42-inch height should be coordinated carefully with surrounding millwork and ceiling conditions. Review the metal range hood installation guide with your contractor and ventilation professional.
Shipping & Returns
This copper hood is handcrafted to order in its fixed 36"W × 42"H configuration and securely crated for freight transportation. Review current production timing, delivery procedures, inspection requirements, custom-order conditions, and applicable return terms on the Shipping & Returns page before placing an order.
Warranty
The handcrafted copper enclosure is covered according to applicable Rustica House warranty terms. Buyer-supplied ventilation equipment remains subject to its manufacturer's warranty. Review current coverage, limitations, and exclusions on the Rustica House Warranty page.
Disclaimer: Handmade surface character, formed curves, seams, strap alignment, rivet placement, crown and apron details, and copper patina tones may vary slightly due to artisan fabrication. These variations are expected characteristics of handcrafted copper and are not manufacturing defects. Copper patinas may continue to develop naturally with age and use. The main product image shows the Natural Fired patina. Lifestyle images may show appliances, cabinetry, decorative elements, or accessories not included with the product. All product images © Rustica House, unauthorized use is prohibited.
