Bell-Shaped Copper Range Hood for Gas Stoves

Product Description

The bell-shaped copper range hood for gas stoves combines a flared handcrafted canopy, squared lower apron, vertical strap detailing, and dark corner accents with practical ventilation planning for active residential cooking. Its narrower upper section transitions into a broader lower body that increases visual and functional coverage above the cooktop while maintaining a balanced architectural silhouette. Two slim vertical straps define the upper section, while three decorative bands and darker corner details organize the wider lower body without overwhelming the hammered copper surface. Buyers may choose smooth or hand-hammered copper in coffee, antique, natural fired, warm honey, oxidized green, or hand-polished finishes. Available from 28 to 78 inches wide, 24 to 72 inches high, and 24 inches deep as standard, the hood can be prepared for wall-mounted or kitchen island installation. Request a custom quote based on your gas range, kitchen dimensions, and selected ventilation equipment.

Product Summary

• Shape: flared bell canopy
• Material: 16-gauge copper
• Texture: smooth or hammered
• Apron: squared lower frame
• Straps: vertical copper bands
• Accents: dark corner details
• Widths: 28 to 78 inches
• Height: 24 to 72 inches
• Mount: wall or island

Custom Sizing

The hood may be proportioned around the gas range, ceiling height, cabinetry, backsplash, and available installation space. Standard widths range from 28 to 78 inches, with heights from 24 to 72 inches and a standard depth of 24 inches. Chimney width, bell flare, apron height, strap spacing, lower projection, and capture dimensions can be coordinated together. Wider or taller versions should preserve the relationship between the narrow upper section and broader lower canopy rather than simply stretching one fixed pattern.

Measurements Needed

Provide the cooking-surface width, requested hood width, available height, mounting height, backsplash thickness, cabinet clearances, desired depth, and duct route. Island projects also require ceiling height, structural-support locations, cooktop centerline, and proportions for every exposed elevation. These measurements allow the exterior shell, apron, straps, insert opening, and duct position to be coordinated before fabrication.

Insert Planning

The copper enclosure is fabricated as an insert-ready shell. Rustica House can supply an optional 200 CFM insert for suitable residential applications. Buyer-supplied internal inserts up to 1,260 CFM and external blower systems up to 1,500 CFM may be accommodated when complete equipment specifications are provided before production. For gas cooking, insert selection should be based on the appliance, cooking load, duct configuration, local requirements, and ventilation manufacturer's recommendations rather than hood appearance alone.

Drawing Approval

For custom exterior proportions or buyer-selected ventilation, provide the insert manufacturer, model, body dimensions, liner cutout, filters, controls, lighting, duct diameter, discharge location, electrical requirements, and service clearances. The bell profile, lower opening, apron dimensions, strap layout, insert placement, and duct centerline can then be coordinated for approval before production.

Design Difference

This hood is more structured than a plain strap-free bell canopy but less ornate than copper hoods built around heavy crowns, embossed artwork, or dense riveted frameworks. Its identity comes from a clear two-part composition: a narrower upper section with restrained vertical detailing and a broader lower capture area framed by straps, corner accents, and a squared apron. The resulting architecture keeps the hammered copper visible while still providing enough metal detailing to give the front elevation a distinctive handcrafted rhythm.

Bell Profile

The canopy expands gradually toward the cooking surface through a controlled outward flare. This geometry produces a generous lower capture area while keeping the upper body lighter and more vertical. Unlike a dome, which develops through a fuller convex volume, this design uses a recognizable bell transition between the narrower chimney and wider base. The squared apron then gives the curved body a firm architectural termination above the range.

Upper Straps

Two slim vertical straps emphasize the height of the upper section and create a measured rhythm against the copper surface. Their narrow scale prevents the chimney from becoming visually heavy while providing continuity with the more detailed lower portion. Depending on selected proportions, strap position can be reviewed so the front remains balanced across different hood widths.

Lower Detailing

Three decorative straps organize the broader lower section and help connect the bell flare with the squared apron. Darkened corner accents provide additional contrast at the edges, reinforcing the enclosure's shape without surrounding the entire canopy with heavy framing. These elements make the hood more architectural than a simple copper shell while allowing the center fields to remain open enough for the hammered texture to be visible.

Squared Apron

The lower apron creates a strong horizontal base beneath the flared canopy. Its rectilinear geometry contrasts with the curved body and visually stabilizes the composition above the gas range. The apron also provides practical interior depth for liner preparation, filters, lighting, reinforcement, and service access associated with the approved ventilation system.

Copper Surface

The hood can be ordered with a smooth or hand-hammered surface. Hammering breaks reflected light into smaller highlights and emphasizes artisan workmanship, while smooth copper gives the bell body broader tonal movement and a calmer appearance. Both treatments can be combined with the same strap layout and apron geometry, allowing the architecture to remain consistent while the surface character changes significantly.

Finish Options

Six copper treatments are available. Coffee creates deeper brown coloration, antique gives the surface a softened aged character, natural fired emphasizes reddish and amber tones, and warm honey introduces lighter golden warmth. Oxidized green adds blue-green weathering, while hand-polished copper creates brighter reflections. Darker finishes emphasize the straps and apron through stronger shadow, while lighter treatments make the hammered texture more visible across the broad canopy.

Gas Stove Planning

Gas cooking produces heat, moisture, grease, and combustion byproducts, so ventilation should be selected around the actual appliance and installation rather than by hood width alone. The broad lower canopy provides physical capture area above the burners, but effective performance depends on the insert, blower, duct diameter, duct length, makeup-air requirements, mounting height, and local code. Buyers using higher-output residential gas ranges should provide complete appliance and ventilation specifications before the shell is approved.

Buyer Table

Hood dimensions, bell proportions, strap layout, cooking equipment, mounting format, and ventilation should be planned together because one change can affect the lower opening, liner clearance, structural support, or duct location.

Product Specifications

• Type: custom copper hood
• Material: 16-gauge copper
• Shape: flared bell canopy
• Texture: smooth or hammered
• Apron: squared lower frame
• Straps: decorative copper bands
• Accents: dark corner details
• Widths: 28 to 78 inches
• Height: 24 to 72 inches
• Depth: 24 inches standard
• Mount: wall or island
• Ventilation: insert-ready shell
• Insert: optional 200 CFM
• Buyer insert: up to 1,260 CFM
• External blower: up to 1,500 CFM
• Finishes: six copper treatments
• Lead time: about 6 weeks
• Delivery: about 8 weeks in total
• Shipping: free USA mainland
• Warranty: 12 months
• Origin: handcrafted in Mexico
• SKU: CH98V2G89

Copper Craftsmanship

Each hood is handcrafted in Santa Clara del Cobre, Mexico. Artisans form the upper chimney, flared canopy, squared apron, straps, side returns, and internal structure around approved dimensions before applying the chosen texture and patina. Rivet placement, edge details, hammer impressions, and finish depth are completed by hand. Slight variation between finished pieces is expected and reflects manual fabrication rather than machine-made uniformity.

Artisan Testimony

Learn more about copper artisan Juan Carlos Hernández and the traditional forming, hammering, joining, riveting, and finishing methods associated with handcrafted copperwork from Santa Clara del Cobre.

Kitchen Styles

The lifestyle images on the product page show this copper hood in Modern, Farmhouse, Transitional, Traditional, and Rustic kitchens. These five settings demonstrate how the same flared canopy, strap arrangement, and squared apron can shift from cleaner contemporary environments to more material-rich heritage interiors. :contentReference[oaicite:2]{index=2}

• Modern: Flat-panel cabinetry, quartz or large-format stone, simple hardware, and restrained lighting allow the hammered copper to introduce warmth without disrupting a clean architectural composition. The controlled strap layout gives the hood enough structure to work beside contemporary appliances.
• Farmhouse: Painted cabinetry, natural wood, apron-front sinks, stone counters, and open shelving complement the warm copper surface. The squared lower frame reinforces the substantial cooking wall while the straps add handcrafted detail without depending on oversized industrial hardware.
• Transitional: Shaker cabinetry, quartzite, tailored millwork, stainless appliances, and mixed-metal hardware suit the balanced combination of curved copper and structured trim. The bell silhouette adds traditional character while the relatively clean front keeps the composition current.
• Traditional: Paneled cabinetry, hardwood flooring, natural stone, and classic molding create an appropriate architectural setting for the symmetrical canopy, dark corner accents, and decorative bands. Deeper copper finishes strengthen the formal character around a substantial gas range.
• Rustic: Reclaimed beams, stone walls, textured plaster, and aged wood emphasize the hammered surface and changing patina. The broad lower body provides enough visual weight for kitchens using substantial natural materials and larger cooking equipment.

Other Kitchen Styles

• Spanish Revival
• Mediterranean
• French country
• Mountain lodge

Gas Hood FAQ

Customize This Hood

Plan the hood around the gas range width, available height, wall or island position, bell flare, apron dimensions, copper texture, finish, strap configuration, structural support, and selected ventilation equipment. Confirm the insert opening and duct position before production. Request a custom proposal from Rustica House.

Related Resources

• Bell shape copper hoods
• Wall and island guide
• Copper patina options
• Copper hammering methods
• Copper hood sizing guide
• Copper Range Hood FAQ

Care and Maintenance

Clean the copper with mild soap, warm water, and a soft nonabrasive cloth, then dry promptly. Avoid acids, ammonia, abrasive pads, powdered cleaners, and aggressive polishing compounds that may alter the selected patina or damage the hammered surface. Review the complete copper range hood cleaning and care guide for recommended maintenance methods.

Installation Guide

Coordinate structural wall blocking or ceiling support, mounting height, duct routing, electrical service, liner access, and insert clearances before installation. Review the metal range hood installation guide before approving final dimensions.

Shipping & Returns

Production takes about six weeks, with delivery commonly reaching about eight weeks in total. Each hood is securely crated for insured freight delivery. Review inspection procedures, custom-order limitations, and eligibility on the shipping and returns page.

Warranty

The handcrafted copper shell and replacement components for a Rustica House-supplied insert include 12-month coverage. Buyer-supplied ventilation equipment remains subject to its manufacturer's warranty. Review exclusions, limitations, and claim procedures on the Rustica House warranty page.

Disclaimer: Handmade dimensions, bell curves, hammer impressions, seams, strap alignment, apron geometry, dark corner details, and patina tones may vary slightly. These differences are expected in handcrafted copper and are not manufacturing defects. Lifestyle images are provided for inspiration only and may show optional configurations. All product images © Rustica House, unauthorized use is prohibited.