US Dollar
Euro
Australian Dollar
Canadian Dollar
Polish Zloty
British Pound
Product Description
This bell copper range hood with pierced ornamental bands combines a graceful curved canopy with matching decorative details at the crown and apron. Unlike bell hoods organized around vertical straps or prominent rivets, its ornament frames the canopy horizontally from above and below. A narrow chimney transitions through sweeping concave curves into a broad cooking-area capture zone. Layered crown molding provides a substantial architectural cap, while the lower apron establishes a balanced horizontal base. Smooth copper panels contrast with softly hand-hammered sections, allowing light to reveal differences in texture without overwhelming the bell architecture. The antique bronze-brown patina adds warm amber variation with subdued darker undertones. Handcrafted in Santa Clara del Cobre, Mexico, the enclosure can be prepared for wall-mounted or kitchen-island installation. Custom dimensions, six copper finishes, and flexible ventilation preparation allow the design to coordinate with individual projects. For more details about its bell profile and pierced metalwork, see our ornamental copper bell hood guide. Customize this ornamental bell copper hood for your kitchen today.
Product Summary
- Graceful bell-shaped canopy
- Matching pierced copper bands
- Decorated crown and apron
- Layered architectural crown
- Mixed smooth and hammered copper
- Antique bronze-brown patina
- Premium 16-gauge copper
- Wall or island installation
- Custom dimensions available
- Handcrafted in Mexico
Custom Sizing
Each hood is made to order so its proportions coordinate with the cooking surface, cabinetry, backsplash, and ceiling. Widths are available from 28 to 78 inches, heights from 24 to 72 inches, and standard depth is 24 inches. Custom fabrication preserves the relationship between the chimney, curved bell canopy, layered crown, paired ornamental bands, and substantial apron as the overall dimensions change.
Measurements Needed
Provide the cooking-surface width, desired hood width, overall height, ceiling height, mounting height, depth, cabinet clearances, backsplash thickness, and duct location. Island projects also require the cooktop centerline and available ceiling framing. Accurate measurements help establish bell proportions, crown height, apron depth, insert opening, and structural requirements before fabrication begins.
Ventilation
The handcrafted copper enclosure and mechanical ventilation equipment are planned separately. Rustica House can supply an optional 200 CFM insert for compatible applications. Buyer-supplied internal inserts up to 1,260 CFM and external blower systems up to 1,500 CFM can be accommodated when complete specifications are provided before production. The shell can be prepared for ducted or suitable ductless configurations with top or rear venting.
Drawing Approval
Confirm width, height, depth, crown projection, apron dimensions, insert opening, and duct centerline before production. For buyer-supplied ventilation, provide the manufacturer, model, cutout dimensions, duct size, controls, lighting, filters, and service clearances. Early approval helps coordinate the enclosure with cabinetry, framing, electrical connections, ductwork, and the selected ventilation equipment.
Bell Architecture
The narrow upper chimney expands through long concave curves into a broad lower capture area. This gradual flare creates a true bell silhouette rather than the straight diagonal planes associated with trapezoid or pyramid hoods. Two related ornamental treatments frame the comparatively quiet central canopy, allowing its flowing shape and contrasting copper textures to remain clearly visible.
Ornamental Crown Band
A pierced ornamental band sits beneath the layered crown and introduces repeating botanical curves across the upper chimney. Open areas within the pattern create small shadow lines and dimensional contrast against the copper beneath. Concentrating this detailed metalwork near the crown establishes a decorative upper boundary without covering the main canopy with additional straps, rivets, or appliqués.
Decorative Apron Band
A matching pierced band extends across the lower apron, visually anchoring the curved canopy and repeating the ornament above. Its scrolling foliate pattern establishes a deliberate top-to-bottom relationship around the simpler central body. This paired treatment distinguishes the design from copper hoods where ornament appears only on the apron or is distributed vertically through straps and riveted framework.
Layered Crown
Projecting rectangular molding completes the chimney above the pierced ornament. Several horizontal levels create controlled shadow lines and give the upper section enough architectural weight to balance the substantial apron below. The crown's straight geometry contrasts with the flowing bell curves and coordinates naturally with traditional cabinetry, plaster surrounds, ceiling trim, and architectural millwork.
Unique Design
The hood's identity comes from ornament framing the bell canopy rather than covering it. Related pierced bands define the crown and apron while the central copper body remains comparatively restrained. Layered molding and mixed smooth and hammered surfaces provide additional distinction. This combination separates the design from bell hoods centered on vertical straps, large rivets, contrasting metals, embossed center panels, or a single decorative lower border.
Copper Texture
Alternating smooth and hand-hammered copper creates another layer of distinction beyond the paired ornamental bands. Smooth areas reflect light more evenly, while shallow hand-worked impressions scatter highlights and create subtle surface movement. The contrast helps define individual architectural sections without introducing another material or color. Natural differences in hammer depth and spacing reflect the handmade fabrication process.
Copper Finishes
The antique finish shown creates a subdued bronze-brown appearance with warm amber highlights and darker areas that emphasize the pierced details. Other options include natural fired, coffee, honey, green oxidized, and hand-polished copper. Finish selection can shift the design from aged and traditional toward warmer or brighter interpretations while preserving the same bell architecture and ornamental framework.
Mounting Options
The enclosure can be fabricated for wall-mounted or kitchen-island installation. Mounting type should be established before production because structural attachment, exposed surfaces, ventilation preparation, and finishing requirements differ. Both configurations retain the curved bell silhouette, layered crown, paired pierced bands, mixed copper textures, and substantial lower apron that establish this model's visual identity.
Wall-Mount Version
The wall-mounted version uses a flat rear surface and places the decorative copper against plaster, stone, brick, handmade tile, or slab backsplashes. Its symmetrical crown and apron details work naturally above a centered cooking surface. Confirm framing, backsplash thickness, cabinet clearances, mounting height, electrical service, insert dimensions, and duct position before fabrication.
Kitchen Island Version
The island version finishes exposed surfaces for viewing from several directions. Bell curvature, crown projection, apron depth, contrasting textures, pierced ornament, and patina become especially noticeable from side and angled viewpoints. Island projects require suitable overhead support and careful coordination of cooktop position, ceiling framing, mounting height, electrical service, duct routing, and ventilation equipment.
Buyer Planning
Plan dimensions, finish, mounting type, ventilation equipment, and structural conditions together before production. The paired crown and apron ornament should remain visually balanced when custom dimensions change. Early coordination also reduces conflicts between the enclosure and cabinetry, backsplash materials, ceiling trim, framing, electrical connections, ductwork, lighting, and the selected internal insert or external blower system.
| Planning | Confirm | Buyer Decision |
|---|---|---|
| Dimensions | Width, height, depth | Match cooking area |
| Finish | Six copper options | Coordinate materials |
| Mounting | Wall or island | Confirm support |
| Ventilation | Insert or blower | Send specifications |
| Ducting | Top or rear route | Confirm before build |
Range Hood Specifications
- Shape: Curved bell canopy
- Crown: Layered rectangular molding
- Upper band: Pierced foliate ornament
- Apron: Matching pierced band
- Material: Premium 16-gauge copper
- Texture: Smooth and hand hammered
- Width: 28–78 inches
- Height: 24–72 inches
- Depth: 24 inches standard
- Finishes: Six copper options
- Mount: Wall or island
- Insert: Optional 200 CFM
- Internal: Up to 1,260 CFM
- External: Up to 1,500 CFM
- Venting: Top or rear
- Build: Made to order
- Origin: Santa Clara del Cobre
- SKU: DM38C8H15
PDF and CAD Downloads
Use the proportional drawing and CAD file to review the bell profile, crown projection, apron depth, ornamental-band placement, insert opening, and surrounding clearances. These technical files support planning by homeowners, designers, cabinetmakers, and contractors. Confirm final dimensions and buyer-supplied ventilation specifications before fabrication.
Craftsmanship
Each hood is handcrafted in Santa Clara del Cobre, Mexico. Experienced coppersmiths form the curved canopy, shape the crown and apron, create the contrasting surface textures, fabricate the pierced ornamental bands, assemble the enclosure, and apply the selected patina. Small differences in hammer marks, pierced details, seams, edges, tool impressions, and finish coloration are natural characteristics of individually made copperwork.
Coppersmith Testimony
Matching ornament at the crown and apron requires careful spacing so both bands remain visually related as custom dimensions change. The copper body is shaped and finished by hand rather than produced as a uniform stamped enclosure. Learn more about the artisans and regional metalworking traditions in the Juan Carlos Hernandez Copper Artisan guide.
Kitchen Styles
The bell form and paired ornamental bands connect naturally with heritage architecture, while the comparatively quiet central canopy allows the hood to work beyond heavily rustic interiors. Antique copper pairs particularly well with wood, stone, plaster, handmade tile, and traditional millwork. The symmetrical upper and lower decoration creates a formal focal point without covering the entire enclosure with ornament. See this handcrafted architectural design across different kitchen settings in our ornamental bell hood kitchen images.
Best Kitchen Styles
- Spanish Colonial: White plaster, dark timber, Saltillo floors, carved cabinetry, iron lighting, and patterned tile reinforce the bell silhouette and pierced copper ornament.
- Hacienda: Rustic woods, stone, terracotta, substantial cabinetry, handmade tile, and forged iron complement the aged copper and balanced Old World detailing.
- Old World Mediterranean: Arched openings, warm plaster, natural stone, dark wood, and patterned tile provide an architectural setting for the layered crown and apron.
- Traditional Transitional: Framed cabinetry, quiet stone, restrained hardware, and simplified millwork balance the handcrafted ornament with cleaner contemporary surfaces.
Other Kitchen Styles
- Spanish Revival
- French Country
- Tuscan
Pierced Ornamental Hood FAQ
A: Matching pierced bands decorate the crown and apron, framing a graceful bell canopy. Layered crown molding and contrasting smooth and hammered copper surfaces add architectural depth.
A: Related scrolling foliate patterns appear beneath the upper crown and across the lower apron, creating visual symmetry instead of concentrating all ornament in one area.
A: Yes. Natural fired, coffee, antique, honey, green oxidized, and hand-polished finishes are available. Review the copper patina options guide before selecting a finish.
A: Yes. Wall and island configurations are available. Island installation requires appropriate ceiling support and advance coordination of mounting height, electrical service, duct routing, and ventilation equipment.
A: Yes. Buyer-supplied internal inserts up to 1,260 CFM and external blower systems up to 1,500 CFM can be accommodated when complete technical specifications are provided before production.
A: No. Slight differences in patina, hammer marks, pierced ornament, seams, and tool impressions are expected and contribute to the individual character of each handcrafted enclosure.
Customize Your Hood
Choose the width, height, copper finish, wall or island configuration, and ventilation preparation required for your project. The curved bell canopy, paired ornamental crown and apron bands, layered molding, and contrasting copper textures remain the defining elements. Configure the enclosure around your cooking surface, cabinetry, ceiling conditions, and selected ventilation equipment.
Related Resources
- Spanish Style Range Hoods
- Bell Shape Copper Hoods
- Copper Hammering Techniques
- Copper Patina Finish Options
- Decorative Copper Apron Guide
Care & Maintenance
Clean the copper with warm water, mild soap, and a soft nonabrasive cloth, then dry promptly. Pay particular attention around the pierced bands and layered molding where cooking residue can collect. Avoid acidic cleaners, bleach, steel wool, abrasive pads, and aggressive polishing products. Read the copper range hood cleaning and care guide for detailed maintenance information.
Installation
Wall installations require secure structural framing, while island configurations need suitable overhead support. Confirm mounting height, dimensions, insert opening, electrical service, and duct route before fabrication. Review the metal range hood installation guide with your contractor during project planning.
Shipping & Returns
Each made-to-order copper hood is securely crated for protected transportation. Review current delivery procedures, freight inspection requirements, custom-order conditions, and applicable return terms on the Shipping & Returns page before ordering.
Warranty
The handcrafted copper enclosure is covered according to applicable Rustica House warranty terms. Buyer-supplied ventilation equipment remains subject to its manufacturer's coverage. Review the complete Rustica House Warranty for coverage details, exclusions, and limitations.
Disclaimer: Handmade dimensions, seams, hammer impressions, pierced ornament, edge work, and patina tones may vary slightly. These variations are expected characteristics of handcrafted copper and are not manufacturing defects. Lifestyle images provide design inspiration and may show optional configurations, finishes, or accessories not included with the product. All product images © Rustica House, unauthorized use is prohibited.
